N.K.P. Pharma - Automatic Single Head Auger Type Dry Syrup Powder
|Product Posted:||Thursday, November 28, 2013|
|Product Listing Expires:||Friday, January 02, 2015|
|Contact Person:||Mr. Darshan Mewada|
|Company Name:||N.K.P. Pharma Pvt. Ltd.|
|Address:||Plot No. 1814/B, Phase-III, GIDC|
|Model:||AF - 60|
|Material Of Construction (For Contact Parts):||AISI 316|
|Material Of Construction (For Unit):||As per GMP Norms|
|Electricals :||440 Volts, 3 Phase (4 wire System) 50 Hz.|
|Flame Proof Electricals:||Available On Demand|
|PLC Controls:||Available On Demand|
|Customization:||Available On Demand|
|Dimensions Length (mm):||1524|
|Dimensions Width (mm):||1105|
|Dimensions Height (mm):||1800|
- Total Compact cGMP model.
- All parts and assemblies coming in contact with powder are made of S.S.316
- "NO BOTTLE, NO FILL" System eliminates wastage of costly powder.
- Conveyor driving is through High quality imported Gear motor.
- Machine speed can be adjusted through A.C. Frequency drive, which is time saving.
- Machine is provided with delrin conveyor belt to avoid sticking of vial on conveyor.
- Pneumatic bottle holding system is connected with auger rotation, which eliminates chances of bottle transfer before completion of filling operation.
- Total PLC control for the machine.
- No change parts are required for change in bottle diameter from 30 to 120 ML.
- The incoming dry bottle (sterilized and siliconised) are fed through the infeed Turn Table with suitably guided on the moving delrin flat conveyor belt at
the required speed for feeding.
- Filling head is mounted on machine top plate.
- When bottle reaches to the filling station, it will be hold by the pneumatic bottle holder.
- Immediately it will be sensed by the bottle sensor as soon as it gets the signals from sensor magnetic clutch starts to rotate which is mounted on auger
- It will fill the desired amount of powder to the bottle through auger, where rotation time is previously saved in PLC control.
- After filling of bottle pneumatic piston goes back and release the bottle to move on conveyor.
- The main advantage of this machine is Pneumatic bottle holding system is directly connected with Auger rotation, so till bottle get filled with powder as
per set value, pneumatic system will not going to release the bottle.
- AF - 60 Automatic Single Head Auger Type Dry Syrup Powder Filling Machine is a compact model used for filling of Dry Syrup Powder in to
- Imported Gear Motor for Conveyor drive.
- A.C. Frequency drive for Conveyor drive.
- "No Bottle, No Filling" System.
- PLC control for machine.
- Pneumatic bottle holding system.