- The Wet Glue Labeling Machine Model PAWGBL-120 is one of the most users friendly.
- The machine is used for full/partiallabeling on different size of Flat or rectangular containers.
- It is capable of labeling up to 120 containers per minutes depending on products and label size.
- The automatic model is equipped with roller spacing device resulting in a simple operation with “No change parts required”. 
 
 Operation:
- The filled and sealed or Empty bottle received from the Turn Table is conveyed from the Conveyor and on the same conveyor one bottle separator attachment is provide to separate the bottle from continuous movement also two pressing device is provided on conveyor to straight the bottle & after straight position top holding pressing device is pickup the bottle in original position after pick up the bottle by top pressing device side pressing device release bottle during releasing portion a sensor provided to sense the product after sensing the sensor give command to operate steeper or servo motor to release label when one label is stick the gap sensor give command to stop the servo or stepper during releasing of label provision of brush to press the label & remove the air between label & bottle after completion of the cycle one operation of labeling is finish & conveyor bring the bottle for next operation.

  Technical Specification:
- Model: PADSL-120
- Direction of Movement: Left to Right
- Label size: 20mm to 200mm width
- Output : Upto 200 bottles/minute
 
  Electrical Specification
- Main Motor: 0.5  HP, 1400 rpm, 3 Phase, 430 V, 50 Hz.
- Conveyor Motor: 0.25 HP/415 Volts/AC/50 Hz Variable Speed
- Top Pressing Motor: 0.25 HP/415 Volts/AC/50 Hz Variable Speed
- Despenser-1 :Stepper Motor 6Amp, 60 KG Tourque.
- Despenser-2 :Stepper Motor 6Amp, 60 KG Tourque
- Label Length: 240mm Maximum
- Label Space: 3mm between labels
- Machine Power: 220 Volts/AC/50 Hz Single Phase
- Machine panel: MMI / PI base Unit
- Machine Dimensions: 3000 mm(L) x 2000 mm(W) x 1950 mm (H)
- Sensor :Sick Germany /Imported
- Case :Dimensions 3200 mm(L) x 2200 mm(W) x 2150 mm (H)
 

  Input Specifications:

 

   Label Specification 
- Length: 20 mm to 120 mm
- Height : 10mm to 240 mm
- Width :20mm to 200mm
  
  Round Shape Container Size for combo model
- Dia:20 mm to 120 mm
- Height: 16 mm to 80 mm
 

   NOTE :  - Depending on the size of container & label size.
                 - We can supply as per customer requirements.

  Utility Requirement:

- Electrical supply : 1 Phase + Neutral + Earthing

- Electrical load: 2.5 KW

- Air Pressure Minimum :6 bar pressure 2 CFM for printing device