N.K.Industries - Automatic Injectable Powder Filling & Stoppering machine
Image 1 of 1
  Email to a Friend
Print Friendly  
   Technical Specifications
Model:  NKPF-250D
Material Of Construction (For Unit):  As per GMP Norms
PLC Controls:  Available On Demand
Customization:  Available On Demand
Weight:  Available On Demand
Dimensions Length (mm):  1550 Kgs
Dimensions Width (mm):  3759
Dimensions Height (mm):  1242
   Product Description

Silent Features
- M.S. moulded structure duly powder coated to avoid any vibration with adjustable screws to adjust conveyor height as per infeed tunnel.
- Total Table top cGMP model.
- All parts and assemblies coming in contact with powder and rubber stopper are made of S.S.316 and easily removable for mandatory Autoclaving/
- €NO VIAL, NO FILL€ System eliminates wastage of costly powder.
- Spring loaded Teflon top seal for powder hopper reduces the friction between and top seal and avoid chance of white particle shading during
- Doctor blade and wiper blade can be adjusted from outside also without disturbing any production, which saves lot of time, powder wastage and
chances of area condition disturbance.
- All assemblies under top plate are positioned as for easy cleaning or maintenance.
- Multiple dosing of injectable powder or change over of container size and different fill size is possible by just changing the vial separator or size of the
piston respectively.
- All driving is through High quality imported Gear motor for better machine performance without vibration or leakage of oil of area floor from gear box.
- Machine speed can be adjusted through A.C. Frequency drive , which is time saving and easy to synchronise unscrambler and scrambler speed with
machine speed.
- Machine is provided with delrin conveyor belt to avoid sticking of vial on conveyor.
- Special clutch devices are provided on vial separator for safety purpose.
- Vibratory bowl for rubber stoppering unit support to run machine with total claimed speed of machine.
- Air filter will be of S.S.316 housing with Nylon cartridge for proper removal of particle of 0.22 micron having 10€ length.
- Vacuum filter will be of PVC transparent material with nylon cartage having length of 10€.
- Imported Gear Motor for Main drive, Unscrambler and scrambler.
- A.C. Frequency drive for Main drive, Unscrambler and Scrambler.
- Pre and Post Gasing unit for Nitrogen or Carbon Dioxide flushing.
- Pure air filter for Air and Vacuum.
- €No Vial, No Filling System€.
- €No Stopper in Chute, Machine Stop System€
- Vacuum pump.
- Acrylic Cabinet with Imported Aluminium Structure for Machine, Unscrambler and Scrambler.
Technical Specification

- Direction : Left To Right.
- Production Rate : Up to 240 fills / Min for Single Dose, Upto 120 Fills / Min for Double Dose, Upto 80 Fills / Min for Triple Dose, Upto 60 Fills / Min
for Four Dose.
- Fill Capacity : 50 mg to 1.5 grms. Single Dose ( with Change Parts) 1.5 grms to 6 grms. Double, Triple and Four Dose. Fill range depending upon vial
opening and bulk density of powder.
- Accuracy : 1% depending upon consistency and the uniformity of bulk density of injectable powder Under controlled level of Humidity (i.e.25%)
- Electrical Supply : 1.00 HP For Main Drive, 0.50 HP For Unscrambler, 0.50 HP For Scrambler.
- Height of Conveyor : Adjustable from 800 To 850 MM
- Vial Diameter : 25 MM To 38 MM MAX.
- Height : 75 MM MAXIMUM.
- Rubber Stopper : 20 MM DIAMETER
- Pneumatic Air : Filtered, oil free, sterile low pressure AIR at 4 kg/cm2 (4/6 bar)
- Vacuum line : 20 HG. ( Pump will be supplied by N.K.)

Contact Person: Mr.Kirti Mevada
Address: Plot No:1521,Phase-3,GIDC Ind.Estate
Area: Vatva
Pin Code: 382445
City: Ahmedabad
All User Products / Company Profile
   Place Your Inquiry Here