PharmaTechnologyIndex.com

Interact

         
Event Calendar


Hot Listings

Most Visited

Featured Products

Fluid Bed Dryer
Image 1 of 3
 
  Email to a Friend
Print Friendly  
   Technical Specifications
 
Model:  DGPFBD - SOO
Material Of Construction (For Unit):  As per GMP Norms
Electricals :  Steam Heating Only
Flame Proof Electricals:  Available On Demand
PLC Controls:  Available On Demand
Customization:  Available On Demand
 
   Product Description

Salient Features
    
- Fluid Bed Dryer offers a lucid solution to drying of wet granules, crystalline or coarse materials. It utilizes the principle of passing the hot air at a high
  velocity through the bed of the material to be dried, thus causing it to fluidize.
- The blower situated on the exhaust side of the dryer operates on negative pressure principle, which creates the induced draught and sucks in the fresh air
  into the dryer. A stream of hot filtered air is introduced from the bottom of product container containing the wet material. This container is provided with the
  air distribution plate and a dutch sieve. The air stream is passed through the bed ofthe material and fluidizes the product particles by creating the turbulence
  in the product container. Due to fluidization each particle gets surrounded by hot air, which leads to quick & uniform heating and drying. Filter bags
  provided at the top prevent escaping of particles from the machine.
     
Mode Of Heating
     
- The different options of heating arrangements are available in FBD viz. Electric/steamffhermic fiuid heating system etc. Electric heaters can raise the air
  temperature by upto 70 e from ambient temp (i.e. from 30 eto 100 q. Similarly the air temperature can be raised by 60 e to 80 e through steam radiator
  depending on the steam pressure.
- The drying time varies from 30 - 60 minutes subjected to various parameters like physical characteristics of material, initial moisture content and its type
  (free moisture or water of crystallisation), steam pressure, drying temperature etc. Generally, the drying time for amorphous is longer than crystalline one
  having same percentage of moisture content.
     
Improved Efficiency & Productivity
       
- In this unit the stream of hot air at optimum temperature and velocity is allowed to come in contact uniformly with each particle granule ofthe product.
  Hence, the efficiency of heat transfer is very high resulting in substantial saving in time and energy.
- Once a product is established, its optimum cycle time allows repeatability of process.
       
Special Features
         
- Single Piece Modulardesign
- Construction as per cGM P design
- All contact parts in SS 304
- Uniform drying with reduced drying time
- Manual shaking device for filter bag cleaning
- Pneumatically operated infiatable food grade rubber sealing for Product container and Filter bag
- Product container can be locked in tilted position for discharging
- Low noise level
- Quick & tool free dismantling of Dutch sieve & perforated sheet atthe product container
- Drain valve with triclover clamp at the bottom chamber
      
Safety Features
       
- Explosion relief vent to withstand upto 2 bar pressure
- Earthing device at Product container
- Air pressure regulatorfor sealing of in fiat able gasket  
- Fluid Bed Dryer offers a lucid solution to drying of wet granules, crystalline or coarse materials. It utilizes the principle of passing the hot air at a high
  velocity through the bed of the material to be dried, thus causing it to fluidize.
        
Applications
    
FBD is a versatile machine having applications in the following fields:
- Pharmaceutical granules/ Bulk drugs
- Dyes and chemicals
- Food products and starch derivatives
- Agrochemicals and pestisides.
   D. G. Pharma Equipment   
Contact Person: Mr. Praful Gajjar
City: Ahmedabad
   Place Your Inquiry Here