PharmaTechnologyIndex.com

Interact

         
Event Calendar


Hot Listings

Most Visited

Featured Products

Fluid Bed Dryer
Image 1 of 1
 
  Email to a Friend
Print Friendly  
   Product Description

Salient Features
      
- Models available in 2.5, 5, 10, 30, 60, 120, 200, 250, 300, 500, 1000 kgs. capacity (Batch size)
- Uniformity in drying and reduction in drying time.
- Micro filter to prevent any fine dust to pass through the products with inlet air.
- An explosion safety flap of adequate capacity at the rear of dryer and an earthing point to prevent static charge in the machine.
- Timer provided to set process time.
- Temperature indicator cum controller for inlet and outlet air temperature. (In Electrically Heated Model only)
- Can be used in the fields of Pharmaceuticals, Bulk Drugs, Dyes & Chemicals, Food Products & Starch Derivatives, Pesticides, Phyto Chemicals,
  Catalysts etc.
   
Process Unit
   
- The process unit is two piece, made of stainless steel of SS-304 GRADE.
- The process unit is single piece made of  SS 304.
- The finish employed externally will be all welds ground back and polished into the surrounding materials.
- All of the external surfaces of the Dryer and all non contact/sight parts will prepared with a uniform fine texture matt finish.
- All of the product contact surface (SS-304) are mirror finished.
- Particular attention has been paid to reduce any source of material Entrapment by mirror polishing flush all welds to create crevice free profiles both
  internally and externally.
- The expansion chamber containing the filter finger bags & dished end are made of single piece construction from SS-304/316 quality steel. Below
   that is the retarding chamber made out of S.S. 304 Retarding chamber is locked with the explosion chamber by means of clamps. The length of
   the retarding chamber is such designed , thereby providing extra large heat exchange are which exposed each and every particle or the charged batch
   in the Fluidized air resulting in instant drying.
- Specially designed base is provided for air vortex effect and to give added strength.
- A central drain is provided in the base to release wash water.
      
Bowl / Product Container
    
- Product bowl is a conical shaped manufactured form SS-304 grade stainless steel having stainless steel mesh support along with fine finish air mesh.
- The product container Trolley is of Tubular construction made form SS-304 pipe mounted on polypropylene castor wheel (2nos fixed & 2nos.
   Swivel for maneuverability ) which imparts rigidity to carry the product container with the charged load.
- The batch loading capacity is always higher in case of “BOMBAY” Fluid Bed dryer, because of better fluidization by varying the frequent shaking
   of the finger bags. Shaking period vary depending on the nature of products. 
    
Rubber Gasket
   
- A solid ‘D' shaped food type silicon rubber gasket is provided in the groove of the flanged joint (between the product container and the retarding
  chamber) to prevent any leakage of air with fines during operation
    
Uniform Lifting Of Container
      
- Product container is lifted by specially designed arrangement with the help of one centrically fitted pneumatic cylinder which ensures uniform lifting
  throughout the periphery of the container which ultimately gives uniform upward pressure to the solid ‘D' shaped Rubber Gasket, thereby preventing
  any leakage during operation.
   
Auto Shaking Device
   
- Pneumatic cylinder is used for auto shaking device of the finger bags is mounted on the body and is fitted with a wire rope made out of S.S. 304
   guided by pulleys thus rendering the shaking extremely efficient. It also brings down the finger bags to such a level that these can be inspected
   very easily form the bottom of the retarding chamber. If the shaking is not efficient , the particles will be retained in the finger bags and there will
   be no proper fluidization resulting in formation of lumps in the products container.
Air Handling Unit
    
- Blower and filter with heating arrangement are housed in the rear chamber . They can also be housed the services zone to avoid sound pollution as well
  as to avoid interference of the maintenance people in the production zone.

Blower
 
- Centrifugal type blower fan with dynamically balanced impeller and backward curved blades.
- All Stainless steel construction.
- Direct coupled non—flameproof electric drive. Anti –vibration mounting and independent sub-support frame.
 
Air filter
 
- Free standing unit constructed from aluminium anodized frame work (SS-304) with doubled skinned panels. All wall panels are cross based for added
  strength . Quick release panels provided for inspection and maintenance access.
- The air intake section has a full face external flange for attachment of angle intact, or and extended inlet air duct.
  Inlet system compressing of 20Micron washable filter. followed by 5 micron pre filter, then pass through , heating coil section containing a full air duct
  steam operated heater battery, constructed with stainless steel tubes and headers and a steel casing (SS-304). The moving process air passes through
   the steam heater to achieve the desired temperature. to match the inlet to the processing unit.
- PT 100 temperature sensing probe will be fitted into the air Transition duct and will be connected up to the control panel.
     
Explosion Vent
     
- As per international practices the equipment is provided with a rapture disc as measures of explosion Vent, Tested at 2 Bar pressure, mounted on the
  side of the dryer.
     
Earthing Device
     
- A std designed earthing device spring type is provided with the dryer however intrinsically safe earthing device with low voltage relay is also available.
     
Electro Pneumatic Control Panel
     
A free stading steel control panel having the following controls.

- Inlet air temperature controller.
- Exhaust air temperature indicator
- Product bowl lifting & lowering valve.
- Process air Damper regulation
- Blower motor, start & stop.
- Compressed air pressure gauges.
- Filter bag shaking timer
- solenoid valves etc.

   Geberix Machinery   
Contact Person: Mr. Mayur S. Joshi
City: Ahmedabad
   Place Your Inquiry Here