Event Calendar

Hot Listings

Most Visited

Featured Products

Comminuting Mill
Image 1 of 1
  Email to a Friend
Print Friendly  
   Technical Specifications
Model:  BEWCMM
Output Kgs / Hr:  25 TO 300
Material Of Construction (For Unit):  As per GMP Norms
Rotor Speed:  1000-2250-4500 RPM
Flame Proof Electricals:  Available On Demand
Customization:  Available On Demand
PLC Controls:  Available On Demand
Weight:  530 Kgs.
Dimensions Length (mm):  1380
Dimensions Width (mm):  850
Dimensions Height (mm):  1000
   Product Description

Salient Features
- GMP point of view machine is provided with SS cladding on base, SS belt guards, SS cover on    motor & starter. No exposed painted surface
   of the machine. Motor rails, screw and guide rods    are chrome plated.
- Beaters assembly bearing are in a separate pillow blocks for ease in maintenance. 
- Very less down time as only beaters assembly will have to be reversed (and not the complete    chamber) for making it knife to impact forward or
   vice-versa which can be done by single    operator. 
- Fixed beaters assembly is provided as a standard supply which increases the output by 10 to    30 %, reduces noise level and is easy to clean as
   there are no cavities. (If product demands,    swing beaters assembly can be provided.) 
- Beaters are stainless steel quality and fitted on a splinted shaft.
- Transmission of heat to the chamber from the bearings is minimum as there are away in    separated pillow blocks. This facilitates to some extent in
   processing of heat sensitive product.
-  Beaters assembly is dynamically balanced which reduces vibration and noise level and    increases bearing life.
- Castors provided for mobility and brakes can be applied for fixing machine at one place. 
- Machine is available in Plain & Water Jacketed model.
- Latest improvements in design makes this unit a truly GMP model and versatile in Operation &    Maintenance. Unit consists of S.S. 304 quality
   hopper, feed throat and processing chamber    (can be provided in SS 316 quality at extra cost) with beaters assembly, heavy duty motor,    starter
   with overload relay, three speed step pulley, suitable screen, SS cladded base having    tabular legs with castors, optional jacket for the feed throat
   and processing chamber for cooling / heating.
Technical Specification
- Blades Swinging type with kinfe & impact edge.
- Screen Round/ Square hole perforated S.S. sheet Or Woven stainless steel wire mesh
- Electric Motor 7.5 H.P. 5.5 K.W. 1440 RPM 3 PH
- Net Wt 400 KGS
- Screen Dia (mm) 1230 L X 760 D X 700 H
   Geberix Machinery   
Contact Person: Mr. Mayur S.Joshi
City: Ahmedabad
   Place Your Inquiry Here